Bought A Dynex Tv. Need Code # To Program Into My Direct Tv Remote. Can You Help?

8

8 Answers

Alex Wheeler Profile
Alex Wheeler answered
DirecTV remotes generally operate off the code 10463. To input this you should turn your TV on, press the TV button, and hold the mute and select buttons. This will make the LED blink twice, at which point you enter the code on the keypad and should try the TV.
If this doesn’t work then instead try holding the ‘Setup’ button until the TV light goes off. Enter ‘991’ on your remote control, again using the numeric pad. The LED light again should blink twice. If it does then aim your remote at the TV then actually press ‘TV’ and then the Power Button. If the set turns off then while it’s off press ‘Setup’ to lock the code in.
DirecTV are affiliated with Sansui so use the same codes, so if this code doesn’t work you can try theirs. The same application method is used too, so their instruction manuals will be useful.
Some instructions mention using a ‘thumbs up’ key and a ‘thumbs down’ key. If your instructions do this then note that the green key is up and the red is down.
If none of this helps then DirecTV themselves advise that you undertake a manual search. For this you need to turn on your TV and slide the ‘Mode’ switch to the TV, AV1 or AV2 position, as desired. You then press and hold both ‘Mute’ and ‘Select’ until the green light under the selected TV mode switch flashes twice, then release. Enter 991, followed by another 1. Point the remote at the TV and press CHAN+. Keep pressing this until the TV turns off. Each press of CHAN+ is moving the remove to the next code. When the TV eventually turns off stop pressing CHAN+ and instead press then release the ‘Select’ key.
If the light flashes 3 times before the TV responds you’ve cycled through all the base codes and your TV is specific and requires the original remote.
Anonymous Profile
Anonymous answered
On your DirecTV remote:
1) move the mode switch at the top all the way to the right to the "TV" mode;
2) hold the mute and select buttons down at the same time until the LED light for the TV mode switch blinks twice;
3) enter 10463 on the keypad - the LED should blink again;
4) move mode switch back to DirecTV and try it.
Anonymous Profile
Anonymous answered
the code for dynex tv's using a direct tv remote is 10463. They are affiliated with sansui. They use the same codes.
thanked the writer.
Anonymous
Anonymous commented
Onesize...thanks so much ! I bought a Dynex tv today and it was not listed on the brand page to program the remote. I am a old lady and not savvy in these matters. You saved me having to pack it up to exchange for another more expensive brand !
Anonymous
Anonymous commented
Thanks, I work at Best Buy. I sell tv's and Direct TV and I didn't know that. This will be helpful for me in selling both products. Thanks from me and all the future customers.
Anonymous Profile
Anonymous answered
Thanks so much..it was a pain to use two remotes!!!
Anonymous Profile
Anonymous answered
I will try the code when I get my tv
judith adam Profile
judith adam answered
Want to add my memorex dvd/compact disc player to my t v that is a dynex and I use direct t.v.

Answer Question

Anonymous