How Do I Change The Transmission Fluid Of A 2000 Jeep Cherokee 4.0L?

Jack up the vehicle and put jack stands or block it up for safety. Have your tools ready, remove the transmission pan and have a big pan to sit under it to catch the fluid. Some pan have a drain plug but newer models do not. After the pan has been removed remove the trans filter from the valve body and toss it away after you have checked to see if the new one is the same. Wash pan, clean off old gasket, replace filter, replace pan and new gasket after cleaning old gasket from tranny and pan, install bolts, fill with fluid, lower vehicle and drive, check for leaks and for fluid level and your in business.

Add Comment

Report

Go to ammco---ha ha remove the transmission pan located under the transmission to drain old fluid change filter then put new gasket on the transmission pan and put back on transmission. Install new fluid. A auto parts store will tell you which type fluid to use ( I think it is dextron 2) and how many quarts you will need. Good luck

Add Comment

Report