There is certain procedure that you are required to follow to load film into the camera and the first thing you should do is to open the back of the camera and open the box that is meant for the film. Now you are to take the film out of the box in which you have bought it and take the film and insert in to the camera. You can push the rewind button also to make sure that the thing is at the place. Now you should pull the film that you find is sticking out and by following some other simple process you will be able to do the job.

If you want to know the procedure in detail I would recommend you to visit a website that has all the procedures described in detail and you can get to know the procedure. The address is following: www.rci.rutgers.edu.