How Does One Fill The Bobbin On A Singer 6235 Sewing Machine?

I have this machine; (copied from book) Raise needle to highest position by turning hand wheel toward you; raise presser foot; open slide plate; turn pattern selector dial until green indicating dot lines up under Straight Stitch/Bobbin Winding. Put an empty bobbin, with black rings facing up, into bobbin case; close slide plate, lining up marks on slide plate and machine bed; this engages the bobbin winder. Bring thread from needle, under presser foot and wind it one turn in any direction, around presser foot screw, pulling it into spring groove on screw; begin running machine; the window in the slide plate lets you watch the bobbin winding. When desired amount of thread has been wound, stop machine. DO NOT ALLOW THREAD TO WIND BEYOND THE OUTSIDE "FULL" RING. Remove thread from presser foot screw; close slide plate, returning machine to sewing position; raise needle to its highest position; pull 4" of thread under foot toward back of machine, and cut. To begin sewing, position needle in fabric where desired, lower presser foot and start machine.

Thank you very much for this response! After spending hours of working with other responses, I found THE one that concisely provided me with the directions of how to wind the bobbin!!
Have a great year... And please keep answering questions as you did here!
WCP

Thinks for the info it worked.
B