Guest
asked 3 years ago
1 Answer - Sort by: Date | Rating
The normal layout of a poker table is 84 inches x 36 inches. And the usual end of each table will be rounded at approximately 18 inch radius circle. This would help in seating 10 people. You will need a round 120-130 dollars to make your poker table.
The materials required Padded railing (1ft sections) x18, Foam Padding (72 x 42 inches) x2, Plywood (8 feet x 4 feet) x1, Casino Felt (60 inches by 12 inches, connectable) x5...giving 60 x 60 inches and Pair of Black table Legs.
First and foremost you need to cut the plywood in to particular lengths. Next, staple foaming to plywood, and stretch the foaming to the opposite ends and staple. Next you will need to stretch the other two sides as well. Follow the same procedure for the felt and also make sure that all the parts are tight and covered. Now you will need to flip the table and join the legs to it. And the last step would be to staple the railing on. Boom! There you go you are done with your very own poker table.
The materials required Padded railing (1ft sections) x18, Foam Padding (72 x 42 inches) x2, Plywood (8 feet x 4 feet) x1, Casino Felt (60 inches by 12 inches, connectable) x5...giving 60 x 60 inches and Pair of Black table Legs.
First and foremost you need to cut the plywood in to particular lengths. Next, staple foaming to plywood, and stretch the foaming to the opposite ends and staple. Next you will need to stretch the other two sides as well. Follow the same procedure for the felt and also make sure that all the parts are tight and covered. Now you will need to flip the table and join the legs to it. And the last step would be to staple the railing on. Boom! There you go you are done with your very own poker table.
0
0
New Comment - Comments are editable for 5 min.