How To String A Recurve Bow?

First of all it is a must to be very careful while you string a bow, it is a dangerous process and you can critically injure yourself. To recurve a bow, perform the following methods. First of all assemble your limbs to the riser now take hook the bigger loop over the top limb. After this, hook the smaller loop over to the bottom limb (Do make sure it is attached in the groove on the bottom limb).

Now go and hook the larger loop of the bow stringer above the top limb. Your next step is to hook the smaller pouch over the bottom limb now hold the riser and let the strings hang down. Now tread on the stringer string and start pulling the riser. After applying enough pressure you can slip the larger loop of the string into the NOC at the end of the top limb and slide off the bow stringer.