How Do You Thread A Singer Sewing Machine Bobbin?

You will receive a bobbin winding spindle along with the machine. Secure a roll of thread on the sewing machine and pass it through the thread guidelines of the sewing machine. In some machine, the guidelines for winding the thread are different from that of sewing itself. Place the bobbin on the spindle and place the spindle on either side of the machine.

Let a few inches of the thread pass through the one hole in the upper portion of the bobbin. Make sure that the needle is disengaged while you thread the bobbin. To begin threading or winding the bobbin, press the presser foot, you should hold the end of the thread while the bobbin is being winded. There is a line on the edge of the bobbin, stop threading by releasing the presser foot when the thread reaches that line. Cut the thread and the bobbin is ready to be placed in the bobbin case.

Threading a bobbin depends on the type of machine. Singer Company manufactures different types of sewing machine. As the model varies, the method of threading the machine also varies.

In a general machine, first of all you need to turn off the power and raise the needle, to its farthest extent. Slowly raise the presser foot. Then hold the trip of the thread. Move the hand wheel towards you in such a way that the needle goes down and raises up. Then slowly pull the thread of needle to get the bobbin thread. Then open the loop, and finally pull the threads back. In this way you will be able to thread a bobbin of singer sewing machine. However, there are different ways to thread different machines. Once you understand how to thread a machine, next time you will do it faster than before.