This Question is Answered 

    Dodge Ram 1500, The Check Gauges Light Has Come On, Why?

    How do I turn off the check gauges light and alarm off in my Dodge Quad Cam truck

    asked 4 months ago

    Date | Rating

    Answers


    Check your fluids! Like the oil, the coolant in the radiator. Check gauges tells you to check what ever your vehicle gauges are programmed to alert you of.

    answered 4 months ago

    Good advice pismo.

    comment made by Tamarind 4 months ago    Report

    Edit Comment

    New Comment

    1000 words left

      #1 find out why it is on! Like; low oil,low coolant,low brake fluid.etc what year of truck can make all the differance. I am a mechanic since 60s, all car have basic principals,but can timely to correctly repair

      answered 4 months ago

      New Comment

      1000 words left

      The check gauges light comes on cause one of this is not working right. Like if the alt. Gauge is not between 13.5 to 14.0 or you`er oil press. Is to low or if it`s over heating.

      answered 4 months ago

      I have a similar problem, but I have a charging system issue. My Alternator is not charging. I have replaced the alternator on my 1999 Dodge Ram 1500 van drive in three months. I have done all of the checks and everything seems to be fine, but the alternator just will not charge my battery. Please help!

      comment made by Thefuture 1 week ago    Report

      Edit Comment

      New Comment

      1000 words left

      You do not say what year your truck is, so, I would take pismos advice and check your fluid levels first.
      If that is not the problem, then take your gas cap off and check to make sure it is in good condition, put the cap back on, making sure to tighten it until it clicks. Sometimes a loose or bad gas cap can cause a check engine light to come on, due to an uneven fuel/air mixture.
      If the check light is still on after that, then you can try taking one of the battery cables loose, leave it disconnected for about five minutes. Then reconnect the cable. Sometimes this will reset the check light.
      If the light comes back on, then take it to an auto parts store such as AutoZone, and have them to put the scanner tool on it to see what codes come up. They will tell you what the codes are for, and most will run the scan free of charge.
      Then go from there. 
      Check lights can come on for any number of reasons.   ♂

      answered 4 months ago

      New Comment

      1000 words left