Hello, I Have A 1997 Jeep Grand Cherokee Limited With A Factory Alarm. I Need To Program The Remote. How Do I Do This?

First, try to re-programme the RKE (Remote Keyless Entry) transmitters before searching for anything else. Assure that the batteries in the transmitters are in working condition and replace them if you are not sure. To programme the transmitters, perform the following:

Open the driver's door and let it be open throughout the programming process. Then, shift the mechanical door lock lever to the LOCK mode, turn the ignition key to the rUN mode. Within a period of twenty seconds, point a transmitter at the receiver dome and push the lock button for a period of five seconds at least. After the receiver has accepted the programming code the driver's door will unlock on its own. The first transmitter has been programmed, in the same extra transmitters up to four may be programmed in the same way, within twenty seconds.

If the alarm does not work properly, you may have a faulty alarm module.

Add Comment

Report