How Do I Change Front Wheel Bearings On A 2001 GMC Yukon?
I have a 2001 GMC Yukon, I believe the front wheel bearings need to be replaced. How do I go about replacing them myself?
2 Answers - Sort by: Date | Rating
The bearing comes with the hub assembly. You have to remove the hub assembly from control arms and steering ends for changing wheel bearing on a 2001 GMC Yukon. The real problem is that the bearing is sealed and is pressured fit in to the hub. A hydraulic press is needed to remove the bearing and install the new one. I think it would be better to go to any auto shop that can press out old bearing and press new one in.
I am giving a link which is giving the information about changing the front wheel bearings in general.
link
I am giving a link which is giving the information about changing the front wheel bearings in general.
link
0
0
I changed the left side hub/bearing assembly on my 2004 Yukon yesterday. Do not remove the knuckle from the control arms and steering ends. Procedure: Jack vehicle and set on jackstands. Remove wheel. Remove brake caliper, then the brake rotor. Remove 3 bolts from back of hub assembly and slide assembly out. It is not press fit into the knuckle. Mine was slightly rusted in so it required a little hammer motivation. Install new hub assembly, rotor, caliper and wheel. 1 hour job.
You can purchase GMC Yukon Wheel Bearings at http://mibearings.com/Parts/CHEVYGMCTRUCK/YUKON12TON.html
You will need a torque wrench, and can get the torque specs from MIBearings LLC (google it)
You will need a torque wrench, and can get the torque specs from MIBearings LLC (google it)
0
0
Guest
answered 6 months ago
- How Can I Find N Calibrate The Minimum Air Idle Screw In A Chevy 4.3 Tbi?
- How Much Is My '93 Suzuki ATV Worth? It Is In Good Condition With Only About 1000 ORIGINAL Miles
- Why Was Oil Lamps Needed?
- Where To Find A Heater Core On A Oldsmobile Achieve?
- Where Is The Heater Core On A Oldsmobile Achieve 98?
- How Do I Winterize A 1996 Ford F150?
- I Have A 98 Ford Windstar And Was Involved In An Accident Where I Got Rear Ended Hard And Pushed Into Another Car, Now My Van Has Water In My Transmission And Is Leaking, Has Anyone Heard Of This Before?
- How To Install A Started For 1995 Ford E 350?
- How Mats Is Use In Maneging Time?
- What Is The Normal Phase Of Gold At Room Temp?
- How To Disengage Pass Time System?
- Where Is Evaperator Solenoid On 2007 Chev Silverado And Is This What Gets Stoped Up With Dirt And Mud?
- Where Is Oil Pressure Switch For 2001 Intrepid?
- Who Was The First Russian To Cross The Finish Line?
- What's Wrong When Tahoe Transmission Wont Leave Second Gear?
- What Do I Have To Do To Get A Motorcycle License?
- Where Is The Camshaft Sensor On A 1995 Buick Le Sabre?
- N I Put My Info On Line To Find Out If Someone Registered Their Vehicle In My Name?
- How Do I Change Low Beam Headlamp Bulb In An S -class Mercedes?
- Where Is Wiper Relay On A 2006 Chevy Impala?
- I Want To Change The Kia Sportage Diesel Engine To Petrol Engine Which Engine Of Toyota Will Fit In?
- Where Is The Map Senor On A 1998 Buick?
- How To Replace License Plate Bulb On A Nissan Quest?
- How To Adjust Belts On 1996 Toyota Cavalier?
- Who Created The Lamborghini?
- How Do I Change The Front Wheel Inner Bearings On A 1999 Gmc Sonoma?
- How Do I Change Front Wheel Bearings On A 2001 Chevy Express?
- How Do I Change Front Wheel Bearings On My 2001 Dodge Grand Caravan?
- How Do I Change Wheel Bearings On A 1998 Gmc Jimmy?
- How To Replace Front Wheel Bearings On A 2001 Pontiac Grand Am?
Featured Question
Alternative Questions
Contributors have said that this question
has the same meaning as:
- How To Change Front Wheel Bearings ?
- How Do I Change The Front Wheel Bearing On A Yukon ?
New Comment - Comments are editable for 5 min.